Router#sh ip protocols
Routing Protocol is "rip"
[the protocol is rip]
Sending updates every 30 seconds, next due in 27 seconds
[updates are sent every 30 seconds , this number on the
right keeps decrementing ]
Invalid after 180 seconds, hold down 180, flushed after 240
[rip timer default values]
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Redistributing: rip
Default version control: send version 2, receive 2
[version of rip]
Interface Send Recv Triggered RIP Key-chain
GigabitEthernet0/0 2 2
GigabitEthernet0/1 2 2
[connected interfaces on the Router]
Automatic network summarization is not in effect
[ no auto-summary command is used]
Maximum path: 4
Routing for Networks:
192.168.2.0
192.168.3.0
[Networks advertised]
Passive Interface(s):
[no interfaces are passive]
Routing Information Sources:
Gateway Distance Last Update
192.168.2.1 120 00:00:20
[IP of connected Router from where RIP routing data is learned ]
Distance: (default is 120)
[administrative distance fault 120]
No comments:
Post a Comment