Extended Ping

Router#ping
Protocol [ip]:
Target IP address: 192.168.1.1
Repeat count [5]:
Datagram size [100]:
Timeout in seconds [2]:
Extended commands [n]: y
[type y or yes here to get extended commands ]
Source address or interface: 192.168.10.1

[ Note : Source  IP or Interface must be up and up meaning
it must be enabled with no shutdown and IP assigned and
line detect or a host/switch etc connected to other end ]
Type of service [0]:
Set DF bit in IP header? [no]:
Validate reply data? [no]:
Data pattern [0xABCD]:
Loose, Strict, Record, Timestamp, Verbose[none]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.10.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0/7/19 ms

Complete Extended Ping from Cisco.